Dukane LCD Data Video Projector 8104HW-WALLARM Manual de usuario

DUKANE CORP AV SERVICE DEPT 2900 Dukane DriveSt Charles, IL 60174800-676-2487 / 630-762-4032 Fax [email protected] www.dukane.com/avI

Screen centerScreen centerScreen thicknessWall hole centerAmount of vertical adjustment42,5195(1,67)125 (4,92)136 (5,35)32 (1,26)c3ac285 (3,35)240c1c

ENGLISH9HAS-K250Screen sizes when used with Hitachi Star BoardProjection sizeAspect ratioDiagonal size (inches)DimensionsProjection sizeAspect ratioDi

10HAS-K250Template sheet usageDetermining location of wall holesPlace the template sheet (J) where you want to project the image. Vertical orientatio

ENGLISH11HAS-K250Adjusting arm lengthArrows at the right and left sides of the template sheet (J) indicate the distance from the screen surface to the

12HAS-K250(L) × 3(N) × 1 Attach the bracket (B) to the LCD projector using four M4 × 8 (G) hexagon head screws. Tightening torque: 0.98 N•m (10 k

ENGLISH13HAS-K250 Attach the LCD projector to which the bracket (B) has been attached to the adjusting block (Q). Tighten the four M4 x 8 round he

14HAS-K250Adjustments Turn the projector on and project an image to make adjustments. -1. Project an image, adjust the image settings and focus on t

ENGLISH15HAS-K250 Adjust the image.-1. Loosen the securing screws. (at the eight locations indicated by the arrows in the figure below)1. Loosen

16HAS-K2501. Fine adjustment of horizontal position2. Fine adjustment of horizontal keystone3. Fine adjustment of vertical keystone4. Fine adjustment

ENGLISH17HAS-K2507. Fine adjustment of vertical position1. Loosen the screw on on the lower right side. 2. Turn the height adjusting screw to adjust

18HAS-K250 -1. The knobs indicated by the arrows can be removed. Place them on the projections inside the front cap (C) for storage. WARNING Adju

ENGLISH19HAS-K250-2. Attach the front cap (C) at the front end of the arm (M). Engage the left, right and center claws. The adjusting knob

20HAS-K250-5. Attach the arm cover (E) to the arm (M). Insert the eight claws in the arm cover (E) in the eight holes in the arm (M).-6. Ass

ENGLISH21HAS-K250(both 4:3 and 16:10 screens)• Roll down screens and other screens that are not perfectly flat tend to substantially distort the proje

22HAS-K250Item Image movementFine adjustment amount (amount of LCD projector movement)Description of adjustment methodFine adjustment of horizontal p

ENGLISH1HAS-K250Wall mount unit for LCD projectorsModel name 8104HWUser’s ManualThe following symbols are used in this manual to help you use this pro

2HAS-K250Installation of this product requires special technical skills. Ask your dealer or service center (for details, see the User’s Manual supplie

ENGLISH3HAS-K250WARNINGTo the customer Do not attempt to install the projector yourself. Have your dealer or service center handle all installation

4HAS-K250Symbol Part name Quantity Appearance Symbol Part name Quantity AppearanceAArm assembly1GM4 × 8 hexagon head screws4BBracket 1 HM4 × 8 round h

ENGLISH5HAS-K250 Remove the shipping screws from the arm assembly (A). The arm assembly (A) is assembled before shipping. Before attaching the arm

6HAS-K250 Remove the base bracket (O) from the arm assembly (A). Before attaching the arm assembly to a wall, remove the screws to disassemble it a

ENGLISH7HAS-K250 Attach the base bracket (O) to a wall using the anchor bolts (M10). The holes in the base bracket (O) are oval to permit horizont